How to use air compression boots at home, step by step

Put both boots on, connect the air hoses to the controller, plug it in, choose one of the 3 modes and one of the 3 intensity levels, and relax for 15 minutes. The boots stop by themselves at the end.

Before the first session

  • Sit or lie down on a sofa or bed with your legs straight and supported.
  • Wear thin trousers or leggings, or use the boots on bare, healthy skin.
  • Check the hoses are pushed firmly into the controller and the boots. A loose hose is the most common reason a chamber does not fill.

Step by step

  1. Open both boots, slide your legs in and close them so they sit snugly from foot to thigh.
  2. Connect each hose to its boot and to the controller.
  3. Plug the power adapter into a UK socket and switch on.
  4. Choose a mode. Start on the lowest intensity for your first session.
  5. Raise the intensity if you want a firmer squeeze. You can change it at any time.
  6. After 15 minutes the session ends. Unplug, then take the boots off.

Mistakes to avoid

  • Starting on the highest intensity. Go up one level at a time.
  • Using the boots while falling asleep. Stay awake during the session.
  • Bending your knees sharply, which can pinch a chamber. Keep your legs fairly straight.

Related guides

Delivery and returns

Free tracked UK delivery in 4 to 7 working days, and 30 days to return for any reason with a free return label. Questions: email contact@vitarest.co.uk, we reply within 1 working day.

Vitarest air compression boots are a massage and relaxation product. They are not intended to diagnose, treat or prevent any condition.